RetroSound® Model Two Radio




RetroSound ®'s Model Two is the most technologically-advanced radio ever made for your classic. This is the only Made-For-iPod® radio for your vintage ride, and also features built-in Bluetooth® connectivity for hands-free phone calls and wireless audio streaming. Model Two features a new 32,000 color display to customize your radio to your vehicle's interior. Two USB ports for iPod®/iPhone® plus two standard auxiliary inputs are included. Model Two has a built-in 25 watts x 4 channel power RMS MOSFET amplifier as well as front and rear RCA pre-outs, plus subwoofer output, to add external amplifiers. It mounts seamlessly into your dash thanks to RetroSound®'s patented InfiniMount adjustable bracket system.

  • Made for iPod®/iPhone®
  • Built-in Bluetooth® connectivity
  • 32,000 color display
  • Authentic push-button styling
  • AM/FM RDS tuner with 30 pre-sets
  • Two rear-mounted USB ports for iPod®/iPhone® or USB flash drive
  • Two auxiliary inputs for portable devices
  • 25 watts x 4 channel RMS power amplifier
  • Dual RCA pre-outs plus subwoofer output for external amplifiers
  • Patented InfiniMount adjustable shaft system
  • Body can be mounted remotely for custom installation using optional extension cable

Model Two is available in five styles:

  • Chrome with chrome push-buttons
  • Chrome with black push-buttons
  • Chrome with ivory push-buttons
  • Black with black push-buttons
  • Black with chrome push-buttons




SPECIFICATIONS

For more information, see the user's manual, or browse our support page.

FM

Tuning Range (USA, EUR, AUS, JAP, RUS tuning capable) with RDS 87.5-107.9MHz
Antenna Terminal External Antenna Connector
Usable Sensitivity 12.5 dBf
Selectivity 75 dB @ 400kHz
Signal to Noise Ratio 62 dB (Stereo), 67 dB (mono)
Harmonic Distortion @ 1 kHz 0.8% (stereo), 0.5% (mono)
Separation 32 dB @ 1kHz
Frequency Response 30-16,000 Hz

AM (EU and US Tuning Capable)

Tuning Range (USA, EUR, AUS, JAP, RUS tuning capable) 530-1710 kHz
Antenna Terminal External Antenna Connector

General

Dimensions (radio face & push-buttons only) 3.5”W x 1.5” H x 1.05” D
Dimensions (radio body) 3.96”W x 1.98”H x 4.30”D
Power Requirements 10.5-14.4 volts
Current Consumption (during operation) Max. 15A
Current Consumption (car off) <3.5 mA
Output Power (@ 14.4 volts @ 4 ohm @ 1% THD) 25x4 watts RMS 45x4 Max Power
Output Impedance 4-8ohm
Low Level Output (4 channels) 2.85 volts
AUX 1 Input (AUX cable length, 8”) >300 mV / 6 kΩ
AUX 2 Input (AUX cable length, 8”) >300 mV / 6 kΩ
USB 1 Input (USB cable length, 40”) 5V (USB female input)
USB 2 Input (USB cable length, 40”) 5V (USB female input)